Gate & Access-Control Enclosures
Fit your access-control devices into a purpose-built metal enclosure. K-Display reviews cabinets, reader housings, pedestals, and mounting plates around your selected devices, cable routes, mounting arrangement, and field-service needs.
The metal interface around your access equipment
A gate-control cabinet and a reader pedestal serve different tasks. One houses components for service; the other presents a device at the position defined by your site and product design. Identify the enclosure you need and the equipment it must accommodate.
We review fabricated metalwork and specified hardware to your drawings. Controls, communications, entrapment-protection functions, and completed-system evaluation remain separately defined integration work.
The faceplate fits the selected reader; the cabinet provides separate component access. Device geometry, mounting, and cable routing determine each metal enclosure.
Parts for your production line
- Control cabinets
- Bodies and access doors with component mounts and specified cable-entry provisions.
- Reader and intercom housings
- Faceplates and formed housings sized to the actual device models.
- Pedestal metalwork
- Posts, formed supports, and base plates to your approved mounting design.
- Internal mounting plates
- Removable plates and brackets for the component and wiring layout.
Interfaces that determine fit
- Device geometry
- Supply bezel, opening, attachment, and rear-clearance details for each selected device.
- Field service
- Define door swing, lock access, and the space needed to replace components at the installed location.
- Outdoor interfaces
- Coordinate entries, closure, gasket details, and finish with your exposure requirements.
- Cable and base connections
- Show the cable path through supports and the approved anchor or mounting pattern.
Build around the selected access devices
Faceplates, cabinet doors and pedestal connections follow the actual device models and installation layout.
Review the device and site interfaces
Confirm whether the project is a cabinet, reader housing, or pedestal and identify the mating geometry.
Produce the coordinated metalwork
Align face openings, component plates, base connections, and access features to the drawings.
Finish and equip
Apply the specified finish and agreed hardware, then check the critical device and closure interfaces.
Connect the pedestal to the site
The cable route and anchor pattern share a small area at the pedestal base. Keep the incoming conduit within the post’s base opening, with room outside the post for a socket to reach each anchor nut. The cutaway shows how these two spaces sit alongside each other.
Check the base detail against the approved site layout before fabrication. Where a base cover is used, its movement and installation sequence need to leave the anchors accessible for tightening before the cover is lowered into place.
Start with your current project package
Send the drawings and quantities you have. We can identify the remaining information needed to quote the work.
- Device drawings
- Send exact models, cutout drawings, attachment patterns, and cable-clearance requirements.
- Cabinet or pedestal layout
- Include installed position, mounting design, and service access.
- Exposure and closure
- Specify material, finish, locks, entries, gaskets, and any evaluation requirements.
- Scope and quantities
- Identify hardware and integration responsibilities, variants, and volumes.